海绵复合机胶水复合机

使用微信扫描二维码分享朋友圈，成交更快更简单！

海绵复合机胶水复合机

江苏鑫利龙智能机械有限公司是一家生产各式复合机械的实体厂家！我们是设计、生产、售后团队为您真诚服务！我们工厂每年出厂200台左右的大大小小的复合机械，而全年不到1%的故障率！这就是我们质量的过硬，从设计到生产，每一步都层层把关。才会有如此的质量！
我们深知，市场是企业发 展的生命线，一个成功的企业，完善的市场营销体系是整个企业存在的根本所在，因此，在加强企业 内部管理和外部形象宣传的基础上，我们一直致力于市场的开发和管理，建立一种能适应现代市场经 济和营销模式，并努力从产品开发、品质管理到售后服务等各个环节做到尽善尽美，使我们的用户能 得到更好的产品和服务。S韩国2:0中国，国足是否保留实力！！！
I、产品质量优良
1、确保质量管理体系在企业内有效贯彻运行规范并落实各项工作要求和行为，使产品质量 达到各项技术标准和用户的要求。
2、在产品的制造全部过程中，严格把好质量关，认真按合同、技术文件和有关标准规范进行检验，不 合格产品不出公司，并接受用户或委托的第三方面进行监督检查。
3、对所提供的产品质量全面负责。
海绵复合机 （水胶复合机） 技术参数:
1 电源 380V 50HZ三相
2 材料有效幅宽 （可根据客户所需订制）
3 加热方式 电加热、导热油加热或蒸气加热
4 电加热辊筒直径 1500mm、 1800mm、2000mm
5 电加热管规格 27pcs*1.5kw=40.5kw
6 辊筒幅宽 1800-3500mm（根据材料幅宽选定）
7 涂布方式 滚涂涂布
8 装机容量 约45KVA
9 设计贴合速度 1-45m/min
10 外形尺寸 约7500*2450*2650mm
11 整机重量 约4500KG
Operators can operate the equipment only after they are fully familiar with the performance and working principle of the machine. The equipment must be operated by a special person, and non-operator can not be disorderly opened and disturbed.
Before production, electrical appliances such as cables, circuit breakers, contactors and motors should be inspected to meet the requirements.
Before production, it is necessary to check whether the three-phase power supply is balanced or not, and startup equipment without phase is strictly prohibited.
During the production period, it should check whether the rotary joints are safe, whether the pipeline is smooth, whether there is any damage, oil leakage, and timely removal.
The hot oil engine must be turned on before production, and can be produced only after the temperature is raised to the required temperature of the process. Before production, check whether the pressure of each barometer is normal, whether there is air leakage in the air passage, and repair it in time.
Before production, check the fastening condition of each joint, loosen or fall off, and repair it in time.
Before large-scale production of equipment, small-scale test should be done before large-scale production can be achieved.
Before production, the lubrication conditions of hydraulic stations, reducers, bearing bushes, screw, etc. should be checked, and the hydraulic oil and lubricating oil should be injected correctly and timely.
After shutdown, the rubber trough and scraper accessories, mesh rollers must be cleaned in time to remove residual glue and dirt from all parts of the machine for next use.